The Working Principle Of Manual Powder Tablet Press Machine‌

The working principle of the manual powder tablet press machine‌ is to manually control the machine, place the powder sample in a specific tablet die, then apply appropriate pressure to compress the powder into solid sheets. This process aims to achieve precise sample preparation by adjusting the technical parameters of the machine, including pressure control, tablet diameter and thickness, etc., to ensure stable and accurate data in the experiment ‌.

The specific working process of the manual powder tablet press is as follows:

Filler: Granular or powdered material is continuously added to the die. When the upper and lower punches of the die rotate to the position corresponding to the filling hopper, the material will fall into the die hole of the die ‌.

Pressing: Rollers are installed above the upper punch and below the lower punch. When the die rotates to the corresponding position of the press wheel, the press wheel exerts pressure on the upper and lower punches, causing the upper punch to move down and the lower punch to move up, thereby continuously pressing the material in the die hole into sheets ‌.

Ejection: The tablets formed by pressing are pushed out of the die hole through the ejection device as the die rotates to a specific position, completing the ejection operation for collection or subsequent processing ‌.

Manual powder tablet press by manually operating the hydraulic pump or mechanical device to apply pressure to the sample in the mold to form the sample under high pressure ‌.

This equipment is suitable for small batch production and laboratory places, etc. It has the characteristics of easy operation and low cost ‌.